Keyboard shortcuts
The keys the program answers to, taken from its menus and screens.
Projects
| Keys |
What they do |
| Ctrl+N |
A new project. |
| Ctrl+O |
Open a project on this PC. |
| Ctrl+S |
Save everything that changed: every route and the section data. |
| Esc |
On the File page: back to the project. |
| Keys |
What they do |
| Ctrl+I |
The Input screen (the Routes workbook). |
| F2 |
New Route. |
| Ctrl+R |
Remove Route. |
| Ctrl+X, Ctrl+C, Ctrl+V |
Cut, copy and paste the selected cells. |
| Ctrl+A |
Select the whole sheet. |
| Ctrl+Z, Ctrl+Y |
Undo and redo on the sheet in front. |
Cross sections and the long section
| Keys |
What they do |
| F6 |
Cross Section. |
| F7 |
Long Section. |
| Enter |
In the drawing or the chainage list: mark the section reviewed and go to the next one still to review. |
| F8 |
Section Settings. |
| Ctrl+E |
Export to AutoCAD… (on the Cross Section or Long Section screen): the section or long section on screen as a DWG or DXF. |
| F11 |
Full screen: no ribbon, status bar or window frame. Press again to come back. |
| Ctrl+F4 |
Close the section view. |
| Ctrl+Z, Ctrl+Y |
Undo and redo edits to the sections. |
| Shift while dragging a point |
Move only its offset. |
| Ctrl while dragging a point |
Move only its level. |
Template Designer
| Keys |
What they do |
| Ctrl+D |
Open the Template Designer. |
| F8 |
In the Draw panel: Ortho, level or vertical only. |
| Ctrl+Z |
Undo the last change to the template. |
Contour
| Keys |
What they do |
| F8 |
Contour Settings: surface, contours, labels, points, cut and fill. |
Dialogs
Most dialogs say their keys at the foot: Enter does the main button (for example Enter
adds in New Route), Esc cancels.
What next